How long does it take for installation?
Our average lead time is 4-6 weeks in Georgia. All lead times are weather permitting.
 
What size should I pour my concrete?
All concrete pads are recommended to pour 2″ wider on all sides.  For Example: If you order a 18×20 garage then your concrete pad would be 18’4″ x 20’4″.

Can I order site-specific drawings?
Yes! If you require site-specific drawings please contact our office for more information. Each site-specific drawings is quoted custom. Typically our generic engineered drawings rated for 45psf/145mph work for most local building code offices, which are included with a paid deposit. Please check your local requirements with your local building permitting office. It is the  customer’s responsibility to order the correct spec building to meet local codes where the structure will be installed.

What type of anchors come with my building?
We include anchoring with all of our buildings.  Your structure will receive concrete anchors, or asphalt anchors, or mobile home anchors for ground installations.

What surfaces can a structure be installed on?
We can install on any level surface, such as concrete, asphalt, dirt/ground, and gravel.

How level does my land need to be for installation?
Your installation site should be level with a 1-3” tolerance. If your site is out of level greater than 3” then you should prepare your site before installation so that it’s level. We highly recommend you speak with a local gravel or concrete contractor so that you can decide the best foundation for your structure based on your budget and use.

What is the difference between vertical & horizontal sides/ends?
When discussing the closed sides or ends of a metal building, the terms ‘horizontal’ and ‘vertical’ refer to the direction of the sheet metal ridges on the exterior surface of the structure. The orientation of these metal ridges can have a significant impact on the visual appeal of the building. Opting for horizontal sides or ends is often the more affordable choice. On the other hand, upgrading to vertical sides and/or ends necessitates additional tubing to properly install the sheet metal panels. This increased complexity requires more labor and materials when compared to the horizontal option. In certain cases, homeowner’s associations mandate the use of vertical sides/ends, while some customers choose the vertical orientation due to personal style preferences.

Do I need a building permit?
Depending on the use, location and size of your structure – you may need to obtain a building permit. All customers should check with their local permitting office to see if their structure will be within local code and, if required, be able to obtain a permit. Maco Structures and Trailers does not obtain permitting on behalf of customers. It’s important to notify your local permitting office to obtain your requirements and guidelines to follow. We proudly build to meet local building codes, be sure to specify on your order any building code requirements to ensure proper pricing for your code requirements.